Rubber Lined Clamps
This clamp range is used mainly in automotive sector for securing cables, hoses and pipes with rubber lining provides protection against impacts and vibration.
Rubber lined clamps are manufactured in 12,7 mm, 15,9mm and 20,0 mm bandwidths from hot dipped galvanized steel, stainless steel or mild steel with Cr+3 zinc coating. M6 and M8 fixing hole alternatives are available. EPDM, CR, NBR or MVQ profiles can be used for rubber lining.
Our rubber-lined P clamps wrap a U-shaped steel band in a resilient EPDM, neoprene, silicone, nitrile or Viton cushion that absorbs vibration, stops galvanic contact and protects hose covers.
Produced in bandwidths of 12.7 mm, 15.9 mm and 20 mm from W1 zinc-plated steel, W3 AISI 430, W4 AISI 304 or W5 AISI 316, they suit everything from engine bays to clean-room piping. Rounded edges and a flush rivet head prevent chafe points, while captive rubber lips seal against dust and splash.
Need a fixed, non-cushioned option? See our retaining clamps.
• Automotive & EV (Cushioned pipe clamps on brake, fuel and battery-cooling lines)
• Rail & Mass-Transit (Bundled cable looms under car bodies)
• Marine & Offshore (Deck hydraulic pipes in salt-spray zones)
• HVAC & Refrigeration (Copper tubes in chiller and rooftop units)
• Food & Beverage Plants (Rubber-lined pipe clips on stainless CIP loops)
• Industrial Machinery (Compressor air and lubricant hoses)
All clamps are supplied with material and rubber compound certificates — see certificates for details.
| Parameter | Range / Option |
| Band width (B) | 12.0 – 20.0 mm |
| Clamp Ø (D) | 4 – 110 mm |
| Fixing hole (C) | M4 · M5 · M6 · M8 · M10 |
| Band thickness (T) | 0.50 – 1.20 mm |
| Steel grades | W1 Zn-plated · W3 AISI 430 · W4 304 SS · W5 316 SS |
| Rubber lining choices | EPDM · Neoprene · Nitrile · Silicone · Viton |
Download full Technical Data (PDF, 0.1 MB)
Working with us means more than buying parts — you’re partnering with a vertically-integrated Turkish manufacturer driven by lean principles and green metrics.
• Kaizen culture – real-time SPC and 5-Why root-cause analysis keep defect rates below 40 ppm.
• Closed-loop galvanizing – in-house zinc and zinc-flake lines reclaim 92 % of process water and cut VOCs.
• Energy recovery & renewables – furnace exhaust heat powers the curing ovens; 35 % of plant electricity comes from solar.
• Certified excellence – IATF 16949, ISO 9001, 14001, 45001
Ready to specify? Send your CAD or BOM via the contact page and our engineers will match the ideal band width, rubber compound and torque spec to your application.